Asus PRIME X670E-P Manual page 20

Please refer to the following table for the recommended VGA configuration.
Recommended VGA configuration
Slot Description
1 PCIEX16_1
3 PCIEX16_2
4 PCIEX16_3
Connect chassis fans to the chassis fan headers when using multiple graphics cards for
better thermal environment.
4. Fan and Pump headers
The Fan and Pump headers allow you to connect fans or pumps to cool the system.
E
•
•
Header
CPU_FAN
CPU_OPT
CHA_FAN1
CHA_FAN2
CHA_FAN3
AIO_PUMP
1-8
Single VGA
A
C
B
F
DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow
inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan headers!
Ensure the cable is fully inserted into the header.
For water cooling kits, connect the pump connector to the AIO_PUMP header.
Max. Current Max. Power
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
Dual VGA
x16 x16
- x4
- -
AIO_PUMP
A
CPU_FAN
B
CPU_OPT
C
CHA_FAN2
D
CHA_FAN1 FAN PWM
E
FAN PWR
D
CHA_FAN3
F
Default Speed
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Full-Speed
Chapter 1: Product Introduction
Triple VGA
x16
x4
x4
FAN IN
GND
Shared Control
A
A
-
-
-
-