Table of Contents
Advertisement
Appliance settings
en
Adjusting the volume of the
operating signals
Select the programme in position 2.
1.
› will now appear on the touch
display, along with the current
volume of the operating signals.
Touch the ˜ selection button until
2.
the required value appears.
Setting values:
0
Off
1
Quiet
2
Medium
3
Loud
4
Very loud
You can now either end setting
3.
mode or continue with it.
38
Adjusting the brightness of
the touch display
Select the programme in position 3.
1.
' will now appear on the touch
display, along with the current touch
display brightness level.
Touch the ˜ selection button until
2.
the required value appears.
Setting values:
1
Dim
2
Normal level of
brightness
3
Bright
4
Very bright
Exiting setting mode
To exit and save the settings:
Touch ç on the touch display or:
■
Wait approximately 10 seconds or:
■
Switch off the appliance. The
■
selected settings will be retained
even after the appliance has been
switched off.
Advertisement
Table of Contents
