Siemens WT47U640EU Installation And Operating Instructions Manual page 43

Table of Contents

Advertisement

Caution!
Material damage/damage to the
appliance
If you pour the wrong quantity of
detergent or cleaning agent into the
appliance, this may result in material
damage or damage to the
appliance.
Use detergents/care products/
cleaning agents and softeners in
accordance with the manufacturers'
instructions.
Boiling water may damage the
Materi a l damage/damage to the appl i a nce
appliance and the condensation
container. Do not pour boiling water
into the condensation container.
If you are using a drain hose to
discharge the condensation, carry out
the following steps before running the
appliance care programme:
Pull the condensation container out
1.
fully from the appliance.
Remove the filter and then the
2.
stopper from the recess in the top of
the condensation container.
Insert the stopper on the underside.
3.
Push the condensation container
4.
into the dryer until you feel it lock
into place.
If you are using a drain hose to
Note:
discharge the condensation, carry out
these steps in the reverse order after
running the appliance care programme.
To start the appliance care programme:
Switch the appliance on if it is off.
1.
Remove all items of laundry.
2.
Clean the fluff filter. ~ Page 35
3.
Select the programme in position 1.
4.
Touch and hold the Iron Dry S
5.
button, and select the programme in
position 4.
'˜‚ and the programme length will
now alternate on the display panel.
Cleaning
en
43

Advertisement

Table of Contents
loading

Table of Contents