Appliance Settings; Activating The Setting Mode; Adjusting The Volume Of The Information Signals; Adjusting The Volume Of The Operating Signals - Siemens WT47U640GB Installation And Operating Intructions

Appliance settings

en
Q
Appliance settings
You can alter the following appliance
A p p l i a n c e s e t t i n g s
settings on the control panel:
The volume of the information
■
signals (e.g. at the end of the
programme)
The volume of the operating signals
■
The brightness of the touch display
■
To alter the appliance settings, activate
setting mode.

Activating the setting mode

Switch the appliance on if it is off.
1.
Touch ç on the touch display for
2.
3 seconds.
This activates setting mode.
The symbols for settings à and ' will
appear on the touch display, along with
the current volume of the information
signals.
The programme in position 1 is
selected.
36
Now alter the appliance settings.
3.
Adjusting the volume of the
information signals
Touch the ˜ selection button until
1.
the required value appears.
Setting values:
0 Off
1 Quiet
2 Medium
3 Loud
4 Very loud
You can now either end setting
2.
mode or continue with it.
Adjusting the volume of the
operating signals
Select the programme in position 2.
1.
› will now appear on the touch
display, along with the current
volume of the operating signals.