Table of Contents
Advertisement
Control Function Guide
Function
ON/OFF
Adjust Temperature
Toggle Between o F / o C
Leave Interior Light On
Hide Display
Adjust Light Color
Enable Sabbath Mode
Disable Sabbath Mode
Showroom Mode
Door Alert Notification
When the door is left open for more than 30 minutes:
•
A tone will sound for several seconds every minute
•
will appear in display
•
Close door to silence alert and reset
USING YOUR ELECTRONIC CONTROL
Electronic control
Command
Press
and release.
Press
or
and release.
Hold
and
for 5 seconds.
Press
and release to leave interior light on for
12 hours; press again to deactivate.
Hold
and press
Press and hold
then press
UI to flash. Once UI flashes, release
and use the
to scroll through options 0-2.
Press
and hold for 5 seconds and release.
Press
and release.
Hold
and
for 5 seconds.
Figure 29
Notes
Unit will immediately turn ON or OFF.
When the display is flashing, press
point temperature. Note: temperature displayed is the actual
temperature inside unit.
The display will change units.
After 12 hours, factory default is restored; light will turn on when
door is open.
Display will turn off when door is closed. Unit will continue to
.
operate. Repeat command to turn on display.
Option
and wait for
and
,
Light will be set at full intensity when door is open, and 50%
intensity when door is closed.
The o F / o C symbol will flash briefly after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate.
Display and interior light return to normal operation.
The o F / o C symbol will flash. Display will be lit and interior light
will function. Unit will not cool. Repeat command to return to
normal operation.
First Use
Initial startup requires no adjustments. When plugged in, the unit will
begin operating under the factory default settings. If the unit was turned off
during installation, simply press
To turn the unit off, press
Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing
towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Marvel recommends allowing the unit to reach set points before
loading.
14
or
Open Door
Closed Door
White
Blue
White
and the unit will immediately switch on.
.
NOTE
to adjust the set
White
Blue
Blue
Advertisement
Table of Contents
