Table of Contents
Advertisement
Controlling External Devices with the TV Remote -
Using the Universal Remote
(MENU/123)
MENU
You can control external devices connected to the TV using the TV's remote control.
"
This function is not available on certain models in specific geographical areas.
"
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup. Refer to "Using Anynet+ (HDMI-CEC)" for more information.
"
Certain external devices connected to the TV may not support the universal remote feature.
Setting up the universal remote control
1.
Connect the external device to control with the universal remote control to an HDMI port on the
TV, and then turn on the external device.
2.
Press the
SOURCE
3.
Select
Universal Remote Setup
screen to complete the set up and register the device. The directions will be different, depending
on the device you want to control.
"
If the external device does not respond after being registered, register it again using its model number.
"
The TV memorizes both the external device and the connection (HDMI 1, HDMI 2, etc.) the device is
connected to.
System
Universal Remote Setup
button on your remote control to bring up the
on the Source screen, and then follow the directions on the
Source
screen.
Advertisement
Table of Contents
Troubleshooting
