Install Drivers & Client Utility; Before You Begin; Installing The Drivers - EnGenius EUB-3701 User Manual

IEEE802.11b/g Wireless LAN USB 2.0 Client Adapter
2 Install Drivers & Client Utility

2.1 Before You Begin

Before installing the new drivers of your USB adapter, you need to disable all of the
Wireless LAN USB drivers that you have installed.
During the installation, Windows 98SE/ME/2000/XP may need to copy systems files
from its installation CD. Therefore, you may need a copy of the Windows installation
CD at hand before installing the drivers. On many systems, instead of a CD, the
necessary installation files are archived on the hard disk in C:\WINDOWS
\OPTIONS\CABS directory.

2.2 Installing the Drivers

Follow the steps below in order to install the USB adapter drivers:
1. Insert the CD-ROM that was provided to you in this package. The setup
should run automatically. If the setup does not run automatically, then you
must manually select the setup.exe file from the CD-ROM drive.
2. Once the setup begins you will see the Installation Agreement, read the
agreement and then click on the Yes button to continue the installation.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Version 1.1
8