Advertisement
Young children may be injured by tipping furniture and the use of a tipping restraint is highly
recommended.
This hardware, when properly installed, could provide protection against the unexpected tipping
of furniture due to improper use.
WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.
Installation instruction:
1.Please ensure the anti-tipping hardware provided is suitable for your wall or else it might damage your wall during installation.
2. Attach one of the mounting brackets (A) securely to the back edge of the furniture. Use the shorter screw (B).
below the bracket mounted to the edge of the furniture.
wall surface.
5. Position the bracket over the anchor and use the longer screw (E) to securely attach the bracket to the wall.
6. Place the furniture so the bracket on the back edge is in line with the bracket on the wall.
7. Lace an end of the nylon restraint strap (C) down through each bracket. Bring both ends together and slide the beaded end of the
strap through the keyhole shaped slot in the other end until snug. Pull down on the beaded end until it snap locks into the keyhole
slot.
8. To double lock return the beaded end back through the keyhole as shown.
9. Check to make sure the strap is securely laced and locked to the brackets.
mounting bracket
short screws
D
E
plastic anchor
long screw
nylon restraint strap
D
A
E
D
E
Advertisement
