Page 1
NORVIK 3 DRAWER CHEST 374447 1.5M X 1.5M POZI SCREWDRIVER (Not Provided) RUBBER MALLET (Not Provided) NOTE. THE MAXIMUM WEIGHT THIS PRODUCT CAN HOLD UP 50 KGS 1 / 17...
Page 2
NORVIK 3 DRAWER CHEST 374447 BASE PANEL DRAWER LEFT PANEL LEFT SIDE PANEL DRAWER RIGHT PANEL RIGHT SIDE PANEL DRAWER BACK PANEL TABLE TOP DRAWER BOTTOM PANEL SUPPORT PANEL BACK PANEL DRAWER FRONT DRAWER FRONT 2 / 17...
Page 6
NORVIK 3 DRAWER CHEST 374447 STEP 1 Gently hit to adjust. Repeat this in the following steps. STEP 2 Gently hit to adjust. Repeat this in the following steps. 6 / 17...
Page 7
NORVIK 3 DRAWER CHEST 374447 STEP 3 E x2 STEP 4 Gently hit to adjust. 7 / 17...
Page 15
NORVIK 3 DRAWER CHEST 374447 STEP 19 Slide the back panel inside the grooves. Gently hit to adjust. STEP 20 15 / 17...
Page 16
NORVIK 3 DRAWER CHEST 374447 STEP 21 Slide the drawers inside the cabinet After you finish the After you finish adjustment of the cams, assembling the cabinet, cover them with the take off the adhesive cover caps. letters. 16 / 17...
Page 17
This product is guaranteed for twelve months from the date of original purchase. if any defect should occur due to faulty materials or workmanship, the unit will either be replaced or refunded at our discretion. You will need to have your receipt or proof of purchase. The following conditions apply: •...