Multi Room System; Multi Room Playback Using The Multi Room; Out Terminals; Multi Room Playback Using The Multi Speaker - Marantz SR6001 User Manual

MULTI ROOM
SYSTEM
The Multiroom System mode allows the same source
or different sources to be heard in two rooms other
than where this receiver is installed.
When using the multiroom system, the audio is
output from the MULTI AUDIO output terminals and
input to the MULTI ROOM amps.
If a surround channel back speaker or speaker C
(see page 24) are not used in the room where this
receiver is installed, the multi speaker system can be
used with the amp for the surround back channel.
This receiver supports multiroom system functions
such as source selectors, OSD menu systems, sleep
timers and remote control.
60
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
2. 1. 4. 3.
AV SURROUND RECEIVER SR6001
INPUT SELECTOR VOLUME
PURE DIRECT SURROUND
DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 NIGHT EQ
L C R
AAC PCM LFE
SL S SR
DSD
DOWN
SURROUND MULTI
MODE AUTO MULTI SPEAKER BAND T-MODE MEMORY CLEAR
7.1CH INPUT DISPLAY
SPEAKERS
PURE DIRECT HT-EQ MultEQ A/B
STANDBY ENTER
MENU EXIT AUX 1 INPUT
POWER ON/STANDBY PHONES DIGITAL S-VIDEO VIDEO
MIC
7.1CH IN 7.1CH IN A/D HT-EQ
0 0 +10
CL MEMO
CH/ CAT VOLUME VOLUME
SPKR A/B MUTE
3.
1. 4.
MULTI/ CAT M-SPKR
INFO MENU
ENTER
T.TONE
/SET UP EXIT
REC T.DISP PTY F.DIRECT
- PRESET + - TUNING +
DISC+ ANGLE SUB TITLE AUDIO
CH-SEL V-OFF ATT.
BASS TREBLE
TV TV DVD DVD VCR VCR DSS DSS
2.
TUNER CD CDR MD
1. 4.
TAPE AUX1 AUX2 AMP
REMOTE CONTROLLER
RC5001SR
1.
Press the MULTI button on the unit or remote
control (after pressing the AMP button on the
remote control). The unit enters MULTI ROOM
mode, and the display indicates "SELECT
SOURCE." The "MULTI" indicator will fl ash for
about 10 seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote control.
Then, the display indicates "MULTI VOLUME"
"MULTI VOL. xx" for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the second
room.
4.
To cancel this function, press the MULTI button
on the unit or remote control (after pressing the
AMP button on the remote control).
"MULTI" indicator on the front panel will be
turned off.
Note:
READY
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU.
UP
(See page 41)
L AUDIO R
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR6001 allows you to connect another set
of speakers and place them in a different room or
separated area for Iistening to music.
2. 1. 4.
AV SURROUND RECEIVER SR6001
INPUT SELECTOR
PURE DIRECT DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 NIGHT EQ
L C R
LFE
AAC PCM
SL S SR
DSD
SURROUND MULTI
MODE AUTO MULTI SPEAKER BAND T-MODE MEMORY CLEAR
7.1CH INPUT DISPLAY
SPEAKERS
PURE DIRECT HT-EQ MultEQ A/B
STANDBY
ENTER
MENU EXIT
POWER ON/STANDBY PHONES
MIC
7.1CH IN 7.1CH IN A/D HT-EQ
0 0 +10
CL MEMO
CH/ CAT VOLUME VOLUME
SPKR A/B MUTE
3.
1. 4.
MULTI/ CAT M-SPKR
INFO MENU
ENTER
T.TONE
/SET UP EXIT
REC T.DISP PTY F.DIRECT
- PRESET + - TUNING +
DISC+ ANGLE SUB TITLE AUDIO
CH-SEL V-OFF ATT.
BASS TREBLE
TV TV DVD DVD VCR VCR DSS DSS
2.
TUNER CD CDR MD
1. 4.
TAPE AUX1 AUX2 AMP
REMOTE CONTROLLER
RC5001SR
1.
Press the MULTI SPEAKER (M-SPKR) button.
The unit enters multi room speaker mode and
the display indicates "SELECT SOURCE" and
fl ashes the "MULTI" indicators for approx. 10
seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote control.
Then, the display indicates "MSPKR VOLUME"
"MSPKR VOL.xx" for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the multi room.
4.
To cancel this function, press the MULTI button
on the unit or remote control (after pressing the
AMP button on the remote control).
"MULTI" indicator on the front panel will be
turned off.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU. (See page
41.)
3.
Notes for Multi Room Speaker
• The MULTI ROOM SPEAKER output terminals can
be used when Surround Back Speaker = "NONE"
READY
VOLUME
in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 31)
DOWN UP
• "The Surr. Back Speakers are in use" is displayed
when the MULTI SPEAKER button is pressed
when the Surround Back Speaker is not set to
AUX 1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
"NONE" in the SPEAKER SETUP menu. (See
SPEAKER SETUP, page 31)
• The Multispeaker mode cannot be used at the
same time as the speaker C. When connecting for
multiroom use, set the SPEAKER C selector switch
on the rear panel to OFF.