Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS
SKU: BFS024
Description :
BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT
Product Dimension : 20"1/2x20"1/2x24".H
Cube Size : 33.8"x 21.4"x 5.7"
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please contact us.
IMPORTANT NOTE:
BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT
NW: 16.5
GW: 19.8 LBS
BEFORE ASSEMBLY
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:sales@eastwestfurniture.net
LBS
Advertisement
Table of Contents
Related Manuals for East West Furniture BEDFORD BFS024
Summary of Contents for East West Furniture BEDFORD BFS024
- Page 1 ASSEMBLY INSTRUCTIONS SKU: BFS024 175 Southbelt Industrial Dr, Houston, TX 77047 Email:sales@eastwestfurniture.net Description : BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT Product Dimension : 20”1/2x20”1/2x24”.H Cube Size : 33.8”x 21.4”x 5.7” NW: 16.5 GW: 19.8 LBS BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully.
- Page 2 Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Remove all wrapping material, including staples & packing straps before you start to assemble. DO NOT tighten all screws and bolts until completely assembled. Keep all hardware parts out of reach of children.
- Page 3 HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Bolt Lock washer 4 PCs 4 PCs (M8x40) ( F8.5xF13mm) Flat Washer Allen key 4 PCs...
- Page 4 STEP 2 Attach Revolving fitting (8) to the legs by using bolts (5) and washers (6) and (7). Tighten with Allen Key (4) as shown on the picture below: STEP 3 Attach Revolving fitting (8) to the Seat Frame by using bolts (5) and washers (6) and (7). Tighten with Allen Key (4) as shown on the picture below: STEP 4 BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT...
- Page 5 Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts. BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT...
Need help?
Do you have a question about the BEDFORD BFS024 and is the answer not in the manual?
Questions and answers