Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
SKU:BDETRNA
Description
Dimension
Cube Size
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time
to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
-
Remove all wrapping material, including staples & packing straps before you start to assemble.
-
DO NOT tighten all screws and bolts until completely assembled.
-
Keep all hardware parts out of reach of children.
Denison Wooden Rectangular Table
: Denison Wooden Rectangular Table
: 72".L x 40".W x 30".H
: 74.4" x 42.5" x 4.7"
BEFORE ASSEMBLY
- 1 -
175 Southbelt Industrial Drive,
Houston, TX 77047
Email:
info@eastwestfurniture.net
NW: 50.7 LBS
GW: 66
LBS
Advertisement
Related Manuals for East West Furniture BDETRNA
Summary of Contents for East West Furniture BDETRNA
- Page 1 ASSEMBLY INSTRUCTIONS SKU:BDETRNA 175 Southbelt Industrial Drive, Houston, TX 77047 Email: info@eastwestfurniture.net Description : Denison Wooden Rectangular Table Dimension : 72”.L x 40”.W x 30”.H Cube Size : 74.4” x 42.5” x 4.7” NW: 50.7 LBS GW: 66 BEFORE ASSEMBLY Thank you for purchasing this quality product.
- Page 2 PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Cross bar S upport bar HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch...
- Page 3 STEP 2 Attach Leg frame to Top (A) using Bolt (3), Nut (4) and Allen key (5). Fully tighten all Allen Screws and Bolts STEP 3 Attach Support bar (E) to Cross bar (D) and Top (A) using Allen Screw (1), (2) and Allen key (5) . Fully tighten all Allen screws.