Special Functions - Smeg Dolce Stil Novo PM6954R Manual

This function can be deactivated by selecting
and a different power level or by switching the
appliance off.
Pause function (on some models only)
This function allows you to pause the operation
of all the cooking zones.
To activate the Pause function:
1. With at least one cooking zone active, press
the and
2. appears on the displays of all the
cooking zones.
The Pause function can be maintained
for a maximum of 10 minutes, after
which the appliance switches off.
To deactivate the Pause function:
1. Press the and
animation appears on the rear right zone
scroll bar.
2. Move your finger from left to right on the
scroll bar.
3. The Pause function has now been
deactivated and the previously set functions
are restored.
The cooking time limitation, the residual
heat indicators and the Controls Lock
function remain enabled during the
Pause function.
Recall Function (on some models only)
This function can only be used if at least
one cooking zone was active at the
time of the unintentional switch-off.
This is used to restore some functions that have
already been started after the appliance has
been switched off unintentionally.
In this case, carry out the following procedure
within 6 seconds:
1. Switch on the appliance.
• The LEDs above the
start to flash.
2. Press the and
time to restore the functions that were
previously active.
The Recall function only allows the following
functions to be restored:
1 Functions and power levels of the cooking
zones.
48 - USE
buttons at the same time.
buttons together. An
and buttons
buttons at the same
2 Timed cooking.
3 Bridge Function.
4 Rapid heating.
5 Booster and Double Booster Functions.
6 Controls lock.
Any functions not listed will not be
restored.

Special functions

Warming Function
This function allows you to keep cooked
food warm or to keep water on the boil.
To activate the Warming function, first turn on the
hob, then:
1. Place a pan on a cooking zone.
2. Press the button to activate the function.
The symbol appears on the display of
the selected cooking zone and the
will appear next to the scroll bar.
To turn off the Warming function, simply press
the button of the relative zone again.
Grill Function
This function is used to activate the
Bridge function automatically for the
right zones only. It is used when using a
griddle or cooking with long pans.
To activate the Grill function:
1. Place a griddle or a long pan on the right
zones.
2. Press the button. The LED above it will
flash.
The symbol appears on the front zone
display and the
zone display. The electronics will automatically
set the power level to 9 (preheating phase).
After 3 minutes of operation, the power will be
lowered to level 7 and the LED above the Grill
function button becomes steady.
Use the scroll bar to modify the power level at
any time.
Press the button to deactivate the Grill
symbol appears on the rear
91477A185/C
icon