Advertisement
Available languages
Available languages
Connections
Cable Connection
Audio Input
AUX Output
Note: Please plug the appropriate cable into the corresponding port to connect the
device, then select the corresponding mode.
Bluetooth® Connection
1. Turn on the sound bar and select the Bluetooth® mode.
2. Activate the Bluetooth® function on your device and search for devices nearby.
3. Find "TT-SK035" in the search results and tap to connect. A beep
will be heard upon a successful connection.
4. The Bluetooth® indicator will turn solid on upon a successful connection.
Note:
• The Bluetooth indicator will keep ashing when the sound bar is pairing.
• Please make sure no other active Bluetooth® devices are within range, and that
the sound bar is within 3ft / 1m away from your device.
• It's not recommended to pair the sound bar with your TV Bluetooth for it may
cause audio delay.
• Before starting to play via Bluetooth, please lower the volume to a moderate
level.
05
Optical Input / Output
Troubleshooting
Q: Why is the unit not turning on?
A: Please check and make sure the power cord is correctly connected to a power
source.
Q: Why is there no sound or why is the sound is distorted?
A: Please go over the following:
• Check to make sure the audio cable is correctly connected.
• Turn up the volume slowly.
• Press the Mute button to switch on the sound.
• Press the Play / Pause button.
• Set the audio output mode on your TV (if applicable) accordingly with the
mode setting on the sound bar.
Q: Why do the buttons on the sound bar not work?
A: Switch o the sound bar and unplug. Then connect it to a power supply and
switch it on again.
Q: Why does the remote control not work?
A: Please go over the following:
• Install 2 AAA 1.5A batteries into the remote.
• Replace the current batteries with new ones.
• Make sure the remote control is pointed to the sound bar during use.
• Make sure the remote control is within operating range.
• Switch o the sound bar and disconnect the power. Then reconnect and
power it on, try again.
Q: Why can't I disconnect the device by pressing the Bluetooth Mode button?
A: You need to press and hold the Bluetooth Mode button on Remote Control for
2-3s, or the Mode Selection button on the sound bar for 5-6s to disconnect a
Bluetooth device. The Bluetooth Mode indicator then will ash when waiting
for a reconnection.
The Bluetooth
®
word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Sunvalleytek International Inc. is under license. Other trademarks and
trade names are those of their respective owners.
06
Advertisement
