Features Thanks for your purchase of our product. Please read through this manual before making connections and operating this product. Retain this manual for future reference. Line input AUX input Optical input Coaxial audio input Full function remote control Bluetooth playback Package Contents: User manual Remote control...
For Your Attention IMPORTANT NOTES Please read through this manual before making connections and operating this product. Retain this manual for future reference. Don't open the cabinet of this unit. No user-serviceable parts inside. Refer servicing to qualified personnel only. Switch off the unit when you don't use it.
Page 5
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.
Panel FRONT PANEL: Standby/ON LINE/AUX COAX/OPT 6 6 7 7 8 8 1 STANDBY Press to switch on the sound base; Press it again to put the sound base in standby mode. (STANDBY--red indicator, BLUETOOTH--red and blue indicator is ready for pairing enabled device, blue indicator flahing means has connected to the sound base.) 2 VOLUME+ (Press to turn up the volume)
Page 7
Panel REAR PANEL: 1 LINE INPUT 2 OPTICAL INPUT 3 COAXIAL DIGITAL AUDIO INPUT 4 AC INPUT SIDE PANEL: 1 AUX INPUT...
Connections Connections Connections Connections Connections AUX IN/LINE IN AUX IN/LINE IN AUX IN/LINE IN AUX IN/LINE IN AUX IN/LINE IN AUDIO INPUT This sound base has an extra group of This sound base has an extra group of This sound base has an extra group of This sound base has an extra group of This sound base has an extra group of audio input terminals.
Connections BLUETOOTH Press standby button to power on the sound base, then press source button to switch the corresponding bluetooth Bluetooth mode, the blue indicator flashing , the sound base is in searching bluetooth signal status, use your smart phone to search the bluetooth signal of the sound base, select HSB3818 on your list, input the password 0000 if need the password prompt, the sound base will synchronize to play...
Remote control Remote Control Operation Insert the batteries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 8 metres from the sensor and within an angle of about 30 degrees from the left and right side.
Basic Playback Operation STANDBY Press to switch on the unit. Press it again to put the unit in standby mode. Press to enter to bluetooth.. Press to enter to COAXIAL IN mode. Press to enter to OPTICAL IN mode. LINE/AUX Press repeatedly to switch between LINE and AUX IN mode.
Troubleshooting Before resorting to maintenance service, please kindly check by yourself with the following chart. Symptom Cause(s) Remedy No Power The DC power cord is not connected to the power Please check that the DC power cord supply or is not connected to a power supply is connected securely.
Specifications Power supply AC ~100-240V,50/60Hz 20W Temperature -10~+35 Working Relative humidity 5%~90% environment Power output (Max) 20WX2 Frequency response 3dB(20Hz~20kHz) -13-...