Adjusting Audio And Video Settings; Using The Setup Screen Menus - Marantz VC8100 User Manual

Adjusting Audio
and Video
Settings

Using the Setup Screen Menus

The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to set
and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up the player using the Setup
Navigator (page 20). If you selected "Not Used" when the
Setup Navigator appeared, you may still set up the player
using the Setup Navigator in the General menu screen.
If you choose not to use the Setup Na vigator , be sure to
make the necessar y settings in the Setup screen
Audio 1, Audio 2, Video, and Language menus as
described on the following pages.
Note
If the Setup screen is opened during playback of a DVD being
viewed in the letter box format, the screen may switch to the
wide screen format. This is not a malfunction, and the screen will
return to normal when the Setup screen is closed.
1
2
3,4,5,6
(Cursor)
1
1
Press (POWER ON/STANDBY on the front
panel).
4 1 ¡ ¢
0 7 3 8
2
Press SETUP.
The Setup screen appears.
e ) a m p l ( E x
2 Language
Audio1 Video
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Setup audio
Digital output format/tone adjust
Move
3
Move the cursor control joystick right or left to
select the menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading.
4
Move the cursor control joystick down to enter
the menu.
The top item within the menu becomes highlighted.
e ) a m p l ( E x
2 Language
Audio1 Video
Dolby Digital Out
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Switch Dolby Digital audio mode
Move
5
Move the cursor control joystick up or down to
select the setting you want to change.
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Move the cursor control joystick right to enter
the setting options.
e ) a m p l ( E x
2
Audio1 Video Language
Dolby Digital Out
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Output Dolby Digital
Move
• Not all menu options can be changed while a
disc is playing. In these cases, the options
appear grayed out on the screen and cannot be
adjusted. To change these settings, press
7 first before pressing SETUP.
• Operating the menu after pressing
cancel the resume function.
• Some menu options are not immediately effective
if set while a disc is playing. To make these
settings effective, stop playback and then start
again, or change the settings while the disc is
stopped.
General
Exit
SETUP
General
Dolby Digital
Dolby Digital 3 PCM
Exit
SETUP
General
Dolby Digital
Dolby Digital 3 PCM
SETUP Exit
STOP
STOP 7 may
39