Table of Contents
Advertisement
C. Installing an AIOM Module (with an AIOM Slot Cover)
1. Remove the AIOM slot cover by removing the knob and screw that is at-
tached to the bracket of the chassis.
2. Pull the bracket away and set it aside.
3. Position the AIOM module in front of the empty slot and gently push it onto
the metal bracket. The AIOM module should slide into the chassis until the
card is securely seated in the connector.
4. Press the blue knob and secure it onto the chassis by turning the knob clock-
wise.
Note 1: This AIOM module does not support hot plug. Please turn off the
AC power and remove the power cord from the wall socket before installing
or removing an AIOM module.
Note 2: Pictures shown above are for illustration purposes only. Actual
products may vary due to product enhancement.
Pull tab to
engage/disengage
Screw knob to
engage/disengage
3-5
Chapter 3: Installation
AIOM 0.5U slot cover
Advertisement
Table of Contents
