Maintenance And Care; Faucet Installation - Black & Decker Price Pfister Saxton RT6 Series Quick Start Manual

7
7A
7D
7 HANDLE ATTACHMENT
Place Plastic Seal Rings (7A) against the bottom of Handle Hubs (7B). Connect Handles
(7C) onto Valves (7D).
8
8B
8 SECURING HANDLES
Be sure Valves and Levers are in the "OFF" position. Secure handles by holding the
Lever (8B) in place and tighten the Hubs (8A) by rotating them in a clockwise direction.
To remove handles, rotate Hubs (8A) in a counterclockwise direction.

FAUCET INSTALLATION

9
9 ATTACHING SPOUT
Assemble and align Quick Connect Spout (9A) onto Anchor (9B) and tighten Set Screw
(9C). Place Button (9D).
7C
7B
7B
7A
7D
8A
9A
9D
9C
9B
ENGLISH
10
5-1/16"
(129mm)
10 AIR GAP
Air Gap for this spout is as shown. Please consult your local building code for Air Gap
restrictions.
11 UNIT START UP
Turn on hot and cold water supply valves, flush Fitting until water is clear and clean.
Caution: Check all connections for leaks. Failure to do so can result in
water damage.
MAINTENANCE & CARE
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfister Consumer Service.
Always turn off water and relieve pressure before working on your
3.
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
3