12 VALVE FUNCTION
By rotating the Lever Handle (12A) slightly counterclockwise, the valve will
be fully activated to the "COLD" position. The water temperature can be
increased by continuing to rotate the Lever Handle (12A) in a counterclockwise
13 TUB SPOUT FUNCTION
When the valve is turned on, water normaly ﬂows through the Tub Spout (13A).
To activate the shower, turn valve on and pull the Knob (13B) up. Hold on until
water ﬂows continiously from the shower arm.
14 FINAL FLUSHING
For ﬁnal ﬂushing, turn valve on and allow water to run through the Tub Spout
(14A) for several minutes. Pull Spout Knob (14B) up to allow water to run through
Shower Arm (14C). Allow water to run for several minutes untill all foreign mater
clears the line.
15 SHOWER HEAD INSTALLATION
Thread Shower Head (15A) onto Shower Arm (15B).
Make sure Shower Head (15A) is securely tightened to Shower Arm
MAINTENANCE & CARE
Replacement parts may be available at the store where you purchased
When replacement parts are not available, please write or call Price
Pﬁster Consumer Service.
Always turn off water and relieve pressure before working on your
NOTE: Trim Care
For all Handles and decorative ﬁnishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!