Programmable Button; Other Options; Replacing Battery Pack - Bartec Pixavi Phone Quick Start Manual

Programmable button

The programmable button can be configured to launch an
applications or action on single tap, double tap and long
press.
It comes preconfigured but can be changed based on your
preferences. Go to Settings -> Programmable Button.

Other options:

Push-to-talk (PTT): Press and hold to talk.
Single tap, double tap and press and hold will be disabled
when PTT is activated.
SOS: Tap the button fast 5 times to send a SOS message to
one or multiple contacts.

Replacing battery pack

Make sure the device is turned off before replacing the
battery pack.
Torx T10 screwdriver (the fasteners are captive screws and
not suppose to be fully removed).
Replace the battery pack and tighten the fasteners.
Only insert or remove the battery outside the potentially explosive
atmosphere
Only use batteries that have been certified by BARTEC,
Type: 17-S1Z0-0001/****
Loosen the two fasteners with the supplied
Remove the battery pack.