Getting Started - Bartec Pixavi Phone Quick Start Manual

SIM/SD tray

Getting started

ejector tool
Insert the SIM card and/or SD card and Battery pack
according to the instructions below.
The ejection tool can be found attached to the SIM/SD-card
instructions sheet (separate sheet)
Ensure that the ejection pin is perpendicular to the hole. Otherwise,
Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be
damaged.
the device may be damaged.
Use only nano-SIM cards and/or Micro SD card. Pixavi Phone and Pixavi Thermal
supports 2x nano-SIM or 1x nano-SIM and 1x micro SD. Pixavi Cam supports 1x micro SD.
Use only nano-SIM cards and/or Micro SD card. Pixavi Phone and
Pixavi Thermal supports 2x nano-SIM or 1x nano-SIM and 1x micro SD.
If the card is not fixed firmly into the tray, the SIM/SD card may fall out of the tray.
Pixavi Cam supports 1x micro SD.
Only insert or remove the battery outside the potentially explosive atmosphere
If the card is not fixed firmly into the tray, the SIM/SD card may fall
out of the tray.
Only use batteries that have been certified by BARTEC, Type: 17-S1Z0-0001/****
Only insert or remove the battery outside the potentially explosive
atmosphere
Only use batteries that have been certified by BARTEC,
Type: 17-S1Z0-0001/****
Pixavi Phone
(1)
Pixavi Thermal
(2)
Pixavi Cam
(3)