Table of Contents
Advertisement
Note
• Select Save profile to register the current settings as a custom menu.
•
Registering Favorite Settings (My Presets)
5.
5. Press the Black button or the Color button.
The printer starts scanning the document.
Important
•
• Color transmission is available only when the recipient's fax device supports color faxing.
•
• Do not open the document cover until scanning is completed.
6. Start sending.
6.
•
• If you load the document in the ADF:
The printer scans the document automatically and starts sending the fax.
Note
• If documents remain in the ADF after the Stop button is pressed while scanning is in
•
progress, Originals in ADF. Remove any originals from the document tray and tap [OK].
is displayed on the touch screen. By selecting OK, the remaining documents are automatically
ejected.
•
• If you load the document on the platen:
After scanning the document, the confirmation screen asking you if you load the next document is
displayed.
To send the scanned document, select Send now to start sending it.
To send two or more pages, follow the message to load the next page, and select Scan. After
scanning all pages, select Send now to start sending.
Note
• When your printer is connected to a PBX (Private Branch Exchange) system, refer to the operating
•
instructions of the system for details on dialing the recipient's fax/telephone number.
• In case the printer was not able to send a fax, such as when the recipient's line was busy, it has the
•
function to automatically redial the number after a specified interval. Automatic redialing is enabled by
default.
463
Advertisement
Table of Contents
