EVGA Z790 DARK K NGP N User Manual page 88

EVGA Z790 DARK K|NGP|N (121-RL-E799)
Standard Smart Fan Mode
To set a Smart curve, select the "Smart Fan Settings" and enter the menu.
First, choose the temperature monitor the PWM controller will use to monitor for its
temp information. It's recommended to link the fan control to the CPU, which is
predominantly the most important temperature in the system. The exception is when
you have 64GB of heavily overclocked RAM, which may cause PWM temps to be a
concern. If this is a concern, set the fan control to the PWM temp.
Once you've set the Fan Control reference point, you can set the Default fan speed. The
fan speed will increase once the temperature reference point has heated up enough to hit
the Level 1 Temperature. Once it hits the Level 1 Temperature the fan controls will
override the Default speed setting based on the temperature at the time.
- 88 -