Honeywell HW-TG7LAF02 Installation And Operating Manual page 5

Repair and Warranty
If trouble is experienced with the Telguard Cellular Alarm Communicator please contact
Telguard Technical Support for trouble shooting, repair and (or) warranty information. The
dealer or end user should not attempt any repair to the Telguard Cellular Alarm
Communicator. Repair of this equipment should only be referred to qualified technical
personnel.
Telguard will repair or replace (our option) inoperative units for up to two years from date of
manufacture. This excludes damage due to lightning or installer error. Unauthorized
modifications void this warranty. Not responsible for incidental or consequential
damages. Liability is limited to price of unit. This is the exclusive warranty and no other
warranties will be honored, whether expressed or implied.
An RMA must be assigned before returning product. You may obtain an RMA via phone at
800-229-2326 option 1, or via email at returns.telular@ametek.com.
Note: RMA number must be on the outside of box or product will not be accepted.
Future Testing and Limitations on Use
The Telguard TG-7 Series is part of an advanced design alarm communication system. It
does not offer guaranteed protection against burglary and fire. Any alarm communication
system is subject to compromise or failure.
The Telguard unit will not work without power. Electrically powered devices will not work if the
power supply is off for any reason, however briefly.
The cellular radio network, needed to transmit alarm signals from protected premises to a
central monitoring station, may be inoperable or temporarily out of service. Cellular radio
networks are also subject to compromise by sophisticated methods of attack.
This equipment, like any other electrical device, is subject to component failure. Although
this equipment is designed to be long lasting, the electrical components could fail at any
time.
Due to these limitations, we recommend that if the automatic self-test feature is not enabled,
other arrangements be made with the user to test the system at least once every three
months. Moreover, arrangements should also be made for on-site inspection/test by a
licensed alarm installer at least once each year.
Terms and Conditions for Use of Telguard Product
These Terms and Conditions are a legal contract between you and Telguard for the title to
and use of the Product. BY RETAINING AND USING THE PRODUCT YOU AGREE TO THE
TERMS AND CONDITIONS INCLUDING WARRANTY DISCLAIMERS, LIMITATIONS OF
LIABILITY AND INDEMNIFICATION PROVISIONS BELOW. IF YOU DO NOT AGREE TO THE
TERMS AND CONDITIONS, DO NOT USE THE PRODUCT AND IMMEDIATELY RETURN THE
UNUSED PRODUCT FOR A COMPLETE REFUND. You agree to accept sole responsibility for
any misuse of the Product by you; and, in addition, any negligent or illegal act or omission of
you or your agents, contractors, servants, employees, or other users of the Product so long as
the Product was obtained from you, in the use and operation of the Product.
LS10265-000HW-E:C 04/27/2021
ii
firealarmresources.com
56052901 – Rev B