3. Release the I/O bracket (C) from the guide pin (D) and guide tab (E)
Then remove the bracket.
Figure 1-41. Mainboard Removal
4. Disconnect the DB FFC from the LTE board connector (F)
5. Disconnect the touchpad FFC from the mainboard connector (G)
6. Disconnect the keyboard FPC from the mainboard connector (H)
7. Disconnect the NFC FFC from the mainboard connector (I)
8. Disconnect the keyboard backlight FPC from the mainboard connector (J)
9. Pry to detach the adhesive tape underneath the RTC battery (K)
10. Disconnect the card reader board FFC from the mainboard connector (L)
(Figure
1-42).
11. Disconnect the left speaker cable from the mainboard connector (M)
1-32
D
C
E
(Figure
(Figure
Disassembly Procedures
(Figure
1-41).
1-42).
(Figure
1-42).
(Figure
1-42).
1-42).
(Figure
1-42).
(Figure
1-42).
(Figure
1-42).