6. Lift slightly the mylar. Then detach the conductive tape (F) from the touchpad
module and top assembly
7. Detach the middle portion (G) of the NFC antenna cable from the top assembly. Then
carefully remove the NFC antenna (H) from the touchpad module
Figure 1-36. Touchpad Module Removal
8. Remove five (5) screws securing the arm brackets and touchpad module
Figure 1-37. Touchpad Module Removal
Disassembly Procedures
(Figure
1-36).
F
H
(Figure
1-36).
G
(Figure
1-37).
1-29