Touchpad Module Removal
Prerequisite:
SSD Module Removal
1. Disconnect the smart card reader FFC from the card reader board connector (A)
(Figure
1-34).
2. Detach the adhesive tape (B) securing the touchpad FFC connection
Figure 1-34. Touchpad Module Removal
CAUTION:
!
Smart card reader FFC (Flexible Flat Circuit) can be damaged if removed while
the card reader board connector is locked.
When removing the smart card reader FFC, carefully lift the portion of FFC
(highlighted by the yellow lines) to detach it from the adhesive tape
underneath as shown in
Disassembly Procedures
B
Figure
1-34.
0
(Figure
1-34).
A
1-27