Xiaomi C300 User Manual page 7

Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your device with Mi
Home/Xiaomi Home app.
To use this product, it is a must to download and install the Mi
Home/Xiaomi Home app. Scan the QR code to download and
install the app. You will be directed to the connection setup
page if the app is installed already. Or search "Mi
Home/Xiaomi Home" in the app store to download and
install it.
Make sure your phone has connected to the 2.4 GHz Wi-Fi.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow
prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the
instructions based on the current app version.
Make sure the camera turns on and the network connection is stable during
connecting. The indicator is quickly blinking orange when waiting for a connection,
and turns into blue once the camera is successfully connected.
Restoring factory settings
If the network connection or the Xiaomi Account that the camera is paired with
has been changed, you need to restore the factory settings. Press and hold the
reset button for about three seconds. Once the indicator starts quickly blinking
orange, the factory settings have been restored successfully. Then you can
reconnect the camera with the app.
Note: Restoring factory settings will not delete the content on the microSD card.
7E1C4FFB
6