Advertisement
Insert the memory card into the card slot with its contacts facing up until you
hear a click. Attach the mount into the slot and slide up, as shown in the figure
below. You will hear a snap when it is in place. Make sure the mount is securely
installed on the dashcam.
To mount the dashcam, peel off the protective film from the adhesive sticker
on the base of the mount, and put the dashcam onto the electrostatic sticker in the
dotted area. As shown in the figure below, run the power cord along the top of the
windshield, down the A-pillar, and around the glove compartment, so that the power
connector is near the cigarette lighter. Connect the power cord to the car charger,
then plug the charger into the cigarette lighter socket.
Turn on the dashcam and adjust the camera angle to ensure that the camera
is facing the front of the vehicle. To turn on the camera, press the Power button. To
turn it off, press and hold the Power button for 3 seconds, and to force shut it down,
press and hold the Power button for 15 seconds.
Advertisement
