1. Manuals
  2. Brands
  3. Aurora Manuals
  4. Extender
  5. HT Pro Series
  6. User manual

Aurora HT Pro Series User Manual

Hdbaset supercharged hdmi 4k60 4:4:4 uncompressed hdbaset cat extenders
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USERS GUIDE
HT Pro Series
HDBaseT Supercharged
HDMI 4K60 4:4:4 Uncompressed
HDBaseT CAT Extenders
www.auroramm.com
Manual Number: 211102 | Firmware Rev: 1.6.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT Pro Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aurora HT Pro Series

Summary of Contents for Aurora HT Pro Series

  • Page 1 USERS GUIDE HT Pro Series HDBaseT Supercharged HDMI 4K60 4:4:4 Uncompressed HDBaseT CAT Extenders www.auroramm.com Manual Number: 211102 | Firmware Rev: 1.6.0...
  • Page 2 Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions.

  • Page 3: Table Of Contents

    USERS GUIDE TABLE OF CONTENTS PACKAGE CONTENTS ................................. 4 OPTIONAL ACCESSORIES ..............................4 INTRODUCTION ..................................8 About ....................................8 Features ....................................8 HT-TC1 Front & Rear ................................9 HT-TX1-WP2 Front & Rear ............................... 11 OPERATION ..................................13 Source Selection ................................13 Auto Sense ..................................
  • Page 4 USERS GUIDE Technical Specifications ..............................42 APPENDIX 4 ..................................46 Cabling ....................................46 APPENDIX 5 ..................................47 Warranty .................................... 47 www.auroramm.com...

  • Page 5: Package Contents

    USERS GUIDE PACKAGE CONTENTS Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged. HT-TC1  HT-TC1 x 1  Wall/Desk Mount Ears with Screws x 4 HT-TX1-WP2  HT-TX1-WP2 x 1 (-W for white, -B for black) Note: Some 2 gang electrical boxes or mud rings have curved or beveled corners that may prevent the HT-TX1-WP2 from properly fitting.
  • Page 6 USERS GUIDE  RK2-1-K (1RU Rack Mount Holds 2 Units) Includes 4 rails and 1 blank  RK2-5-K (5RU Rack Mount Holds 12 Units) Includes 24 rails and 4 blanks  RK2-BP-K (Blank Plate for Rack Mounts)  RK2-RL-K (For VLX-TC1 Use in Rack Mounts) ...
  • Page 7 USERS GUIDE  IR Receiver CA0026-1  IR Emitter CA0061-1  RS-232 Adaptor CA0052-F2T3R (3.5mm TRS to FEMALE DB89 2-TX 3-RX) RS-232 Adaptor CA0052-F3T2R (3.5mm TRS to FEMALE DB89 3-TX 3-RX) RS-232 Adaptor CA0052-M2T3R (3.5mm TRS to MALE DB9 2-TX 3-RX) RS-232 Adaptor CA0052-M3T2R (3.5mm TRS to MALE DB9 3-TX 2-RX) ...
  • Page 8 USERS GUIDE  DXB-8 & DXB-8i (8 Button Wall Plate) www.auroramm.com...

  • Page 9: Introduction

    This will end stock disproportions, make servicing easier, and add new capabilities as in seconds the units can reverse direction. The new HT Pro Series even has Dante® option for 2 or 8 channels. We even went a step further by implementing ARC (Audio Return Channel) and allowing it to be fed to Dante or to the local line output making it a first.

  • Page 10: Ht-Tc1 Front & Rear

    USERS GUIDE HT-TC1 Front & Rear Front LED Indicators • POWER: Lights green when power is present. • STATUS: Will blink steady if unit is working properly. • HDBT: Lights when HDBaseT RJ-45 has proper connection between an RX/TX pair. Blinks when in sleep mode.
  • Page 11 IR IN: Plug the IR receiver into this port. The front built in IR receiver will no longer work once the external receiver is plugged in. Note this port should be used with Aurora IR receiver model as other brands may not follow the correct pinout or voltage.

  • Page 12: Ht-Tx1-Wp2 Front & Rear

    Rear Connections • 48V DC: Power connector for 48V DC power supply. If remote device can supply power over HDBaseT then the local power is not required. Currently all receiver types from Aurora supply power over the HDBaseT. • HDBaseT: Connect CAT 5e/6/7 cable. Shielded cable is not necessary unless the environment has a lot of electrically noise.
  • Page 13 USERS GUIDE prevent the HT-TX1-WP2 from properly fitting. Make certain to use a brand that fits the full dimensions listed in the specification section. Note: Only 1 supply or PoE is required to power both units from RX which can send power to the wall unit.

  • Page 14: Operation

    USERS GUIDE OPERATION Source Selection The HT Series can change between the various sources via front buttons, RS-232, LAN, and Auto-Sense. Once a source is selected the display will lock within a few seconds. The time to lock depends on the display but typical time can be from 3-5 seconds.

  • Page 15: Applications

    USERS GUIDE APPLICATIONS Example 1 Typical HT-TX1-WP2 Transmitter to HT-TC1 Receiver www.auroramm.com...

  • Page 16: Example 2 Dxb-8 Button Wall Control To Ht-Tx1-Wp2

    This allows not only the switching of the HT-TX1-WP2 to be controlled but the remote display device as well. Make certain the baud rates are set the same on the HT-TX1-WP2 and the DXB-8. More information on the DXB-8 can be found on the Aurora website www.auroramm.com...

  • Page 17: Web Page Setup

    USERS GUIDE WEB PAGE SETUP Factory default is DHCP/Auto IP but for static the default will be 192.168.1.10 General Settings www.auroramm.com...

  • Page 18: Network Settings

    USERS GUIDE Network Settings www.auroramm.com...

  • Page 19: Port Settings

    USERS GUIDE Port Settings Note: Port Processing Session when set to Port Mirroring will allow the baud rates from one end to pass- through to the other. This feature is useful when combining with a DXB-8 or simply looking for a basic pass- through.

  • Page 20: Video/Audio Settings

    USERS GUIDE Video/Audio Settings www.auroramm.com...

  • Page 21: Control Protocols

    USERS GUIDE CONTROL PROTOCOLS RS-232 Commands ! - Command, ? - Query, ~ Response <CR> = 0x0D Hex / 13 Decimal The serial command can be issued by the user via the local serial port of the device. !** is the command header used to specify the device.
  • Page 22 USERS GUIDE Mask X = 0 or 1 0 = Off Debug Web 1 = On Server !**DEBUGWSx<cr> Processor Example: !**DEBUGWS1 Response: ~**DEBUGWS1<cr> X = 0 or 1 0 = Off Debug Web 1 = On Video !**DEBUGMPx<cr> Processor Example: !**DEBUGMP1 Response: ~**DEBUGMP1<cr>...
  • Page 23 USERS GUIDE Lineout - 1, Dante - 2, Stream Audio - 3, Remote Audio- Example usages Linein to Lineout !**AUD1,1 Linein to Dante !**AUD1,2 Linein to Stream Audio !**AUD1,3 Note: Need to enable the audio insertion to work this routing. Linein to Remote Audio !**AUD1,4 src: Video source number 1, 2, 3, 4...
  • Page 24 USERS GUIDE src: 1 or 2 or 3 or 4 prio: 1 or 2 or 3 or 4 1 has highest priority Set video source !**VID_SRC_PRIO<src>,<prio><cr> !**VID_SRC_PRIO1,1<cr> priority Response: ~**VID_SRC_PRIO1,1<cr> Note: Only for HT-TC1 TX board. Factory defaults the HT-TC1 to default configuration. The default configuration is: IP mode = Auto-IP Static ip = 192.168.1.10...
  • Page 25 USERS GUIDE ‘0x00’ character in the UART. ~**LINEIN_VOL<0-100><cr> Line in !**LINEIN_VOL<0-100><cr> volume !**LINEIN_VOL88<cr> ~**LINEOUT_VOL<0-100><cr> Line Out !**LINEOUT_VOL<0-100><cr> volume !**LINEOUT_VOL88<cr> Response: ~**LINEOUT_VOL88<cr> 1 = Mutes the Linein 0 = Unmute the Linein Linein Mute !**LINEIN_MUTE<0/ 1><cr> !**LINEIN_MUTE0<cr> Response: ~**AUD_MUTE0<cr> 1 = Mutes the Line out 0 = Unmute the Line out Lineout !**LINEOUT_MUTE<0/ 1><cr>...
  • Page 26 USERS GUIDE sleep: 0 - 10 minutes Sleep time is the time after which the OLED goes to screen saver mode if there is no update in OLED menu. 0 - OLED doesn’t go to screen saver Adjust OLED sleep !**OLED_SLEEP<sleep><cr>...

  • Page 27: Serial Query Commands

    USERS GUIDE Serial Query Commands These serial commands are used to query the device status/configuration. The headers used are the same as that in Serial commands. Serial Query Command String Format Information X = 000 - 255 Web Server IP Address ?**IP<cr>...
  • Page 28 USERS GUIDE Response: ~**VER1:a.b.c<cr> Application version ?**VER1<cr> Version is ‘a.b.c’. Response: ~**VER2:a.b.c<cr> Version is ‘a.b.c’. Protocol API version ?**VER2<cr> For current document, it will be 1.0.0. Response: ~**VER3:a<cr> Version is ‘a’. VGA processor version ?**VER3<cr> Note: Only for HT-TC1 W board. Response: ~**BOOTAVAILx<cr>...
  • Page 29 USERS GUIDE disable, Audio_insert4-disable Returns the static ip of the device <cr> ?**STATICIP Response: Static IP ?**STATICIP<cr> ~20STATICIP<ip>,NM<netmask> ip: ip address netmask : netmask Get the status of auto sense Applicable only in TX ?**AUTO_SENSE<cr> Auto sense ?**AUTO_SENSE<cr> Response ~**AUTO_SENSE<x><cr> x: 0 (Disable) 1(Enable) Note: Only for HT-TC1 TX board Table 2.

  • Page 30: Reax Commands

    USERS GUIDE ReAX Commands The device parameters can be controlled by ReAX commands. A Tcp server is running at the port 6970 which listens for the ReAX command and responds in JSON format accordingly. ReAX Command String Format Information Modify or set the audio routing. Route From: none, linein, dante, hdmi, remote_audio, arc Route To...
  • Page 31 USERS GUIDE set_ip auto_ip set_ip DHCP Displays the full info of the Audio routing in the device of the current selected source get_audio_route get_audio_route Eg: get_audio_route Returns the audio insert state for the video port Video_port: in1, in2, in3, in4, stream(only for decoder) get_aud_insert get_aud_insert <video_port>...
  • Page 32 USERS GUIDE streamed. get_video_source Returns the Current ip of the device get_ip get_ip get_ip Returns the last saved static ip address get_ip_static get_ip_static get_ip_static Returns the mac id of the device get_mac get_mac get_mac Returns the rs232 configuration values port_num: 1 get_rs232 get_rs232 <port_num>...
  • Page 33 USERS GUIDE set_video_src_prio in1 1 Returns the auto sense priority for the video port Video_port: in1, in2, in3, in4, stream(only for decoder) get_video_src_prio get_video_src_prio <video_port> get_video_src_prio in1 Enable or Disable HDCP support set_hdcp set_hdcp <enable/disable> set_hdcp enable Returns the HDCP state of the system get_hdcp get_hdcp get_hdcp...
  • Page 34 USERS GUIDE Sets the device in to DHCP Mode set_ip DHCP set_ip DHCP set_ip DHCP set_ip auto_ip set_ip auto_ip set_ip auto_ip Defaults the file system. After defaulting, the device will reboot with /IR and /wwwpub directories present. filesystem_default filesystem_default filesystem_default Factory defaults the HT-TC1 to default configuration.
  • Page 35 USERS GUIDE get_usb_mode Returns the serial number of device get_serial_number get_serial_number get_serial_number Returns the button lock status get_button_lock get_button_lock get_button_lock Returns the firmware version get_fw_version get_fw_version get_fw_version Returns the command api version get_api_version get_api_version get_api_version Returns the silicon device firmware get_sil8784_fw_versi get_sil8784_fw_version get_sil8784_fw_version...
  • Page 36 USERS GUIDE Change OLED sleep time to 1 min oled_set sleep 1 Change OLED menu brightness to 10 oled_set menu_bright 10 Change OLED screen saver brightness to 1 oled_set sleep_bright 1 oled_wake oled_wake Wake OLED from sleep Returns the current OLED settings get_oled_setting get_oled_setting get_oled_setting...

  • Page 37: Ir Extenders

    *Note: If you are not using an approved Aurora branded receiver, make certain you do not exceed the 5v signal level limitation as some devices use 12v. Also, IR Receiver must be 30K-60KHz inverted 5V signal. Failure to do so will result in damage.

  • Page 38: Connector Pin Definition

    USERS GUIDE CONNECTOR PIN DEFINITION HDMI TMDS Data2+ Pin 8 TMDS Data0 Shield Pin 15 Pin 1 Pin 2 TMDS Data2 Shield Pin 9 TMDS Data0– Pin 16 Pin 3 TMDS Data2– Pin 10 TMDS Clock+ Pin 17 DDC/CEC Ground Pin 4 TMDS Data1+ Pin 11...

  • Page 39: Cat5E/6/7

    USERS GUIDE CAT5e/6/7 T568A and T568B Wiring www.auroramm.com...

  • Page 40: Troubleshooting

    Make certain wall outlet has power. 3. LAN Not Working a. Verify receiver unit is capable of LAN. a. Verify using proper emitter at receiver unit. Use Aurora branded accessories for best 4. IR not working results. a. Total power between the 2 ports is 5 watts. If exceeded the current protection will kick in 5.

  • Page 41: Appendix 2 Firmware Update

    APPENDIX 2 Firmware Update HT Series Firmware Update Tool HT Update Tool can be downloaded from the Aurora portal on www.auroramm.com. Once downloaded, extract and run the "htfwtool.exe" file. It'll open a window and tell you to go to 127.0.0.1:3002 on your browser (port 3002).
  • Page 42 USERS GUIDE TFTP Tool Method The HT Series device can be put to bootloader mode in one of the following ways: • Press and hold the FUNC button when the board is powered on. • Issue !**WSUPDATE<cr> command via serial port. !** is !20 for TX /HTW and !30 for RX. •...
  • Page 43 USERS GUIDE APPENDIX 3 Technical Specifications Model Name HT Series Technical HT-TC1 CAT 6a will achieve 230ft 70m for pixel clock >225MHz Distance CAT 7 will achieve 328ft 100m for pixel clock >225MHz Max Resolution 4K60 4:4:4 Color Depth 24bit 5e/6/6a/7, 36bit 5e/6, 48bit 5e/6/6a/7 RS-232 300 –...
  • Page 44 USERS GUIDE Power Consumption 12.9 Watts with USB [max] Operation Temperature 0~40°C [32~104°F] Storage Temperature -20~60°C [-4~140°F] Relative Humidity 20~90% RH [no condensation] 1x HT-TC1 Package Contents 2 x Wall / Desk Mount Ears with Screws IR Receiver 30K-60KHz (CA0062-1) IR Emitter (CA0061-1) PS0094-3 48v DC 25 Watt Power Supply PS0081-1 48V PoE+ 25 Watt Power Supply...
  • Page 45 USERS GUIDE Model Name HT-TX1-WP2 Technical HT-TX1-WP2 Wall Plate CAT 6a will achieve 230ft 70m for pixel clock >225MHz Video Distance (HDBaseT) CAT 7 will achieve 328ft 100m for pixel clock >225MHz Max Resolution 4k x 2k @ 60Hz 4:4:4 Uncompressed Color Depth 24bit 5e/6/6a/7, 36bit 5e/6, 48bit 5e/6/6a/7 RS-232...
  • Page 46 USERS GUIDE Power supply 48V DC 8 Watts without USB Power consumption 12.9 Watts with USB Operation temperature 0~40°C [32~104°F] Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] 1x HT-TX1-WP2 Package Contents 1x Paintable White Wall Plate 1x User Manual PS0094-3 48v DC 25 Watt Power Supply PS0081-1 48V PoE+ 25 Watt Power Supply Options...
  • Page 47 APPENDIX 4 Cabling Aurora extender products have been tested utilizing shielded cabling. Although our products will work fine without shielded cable it is highly recommended for environmental reasons as the signals are high frequency and can radiate as well as be susceptible to external frequencies and possibly cause noise or disruption in the image.
  • Page 48 Limited 5 Year Warranty Aurora Multimedia Corporation (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 5 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2019 and after.
  • Page 49 USERS GUIDE Aurora Multimedia Corporation 205 Commercial Court | Morganville, NJ 07751 Phone: 732-591-5800 | Fax: 732-591-6801 www.auroramm.com...

Table of Contents