Advertisement
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS
TB-RP5000W Deployment Considerations
When Honeywell wireless thermostat cannot be discovered or added to a WEBs-AX controller database due to
distance, the use of repeaters to bridge communication back to the WEBs-AX controller is necessary.
The number of repeater(s) necessary depends on how many devices are not able to join the WEBs-AX controller and
how they are organized and distanced from each other.
• Clear line of sight distance between 2 nodes should be under 100 feet (30 M)
• Non line of sight distance for typical wall gypsum partitions made with metal stud frame should be under 30 feet
(10M)
If a single thermostat is too far away and cannot join the main network a single repeater may be used (Fig. 5).
If a single thermostat is too far away and cannot join the main network with a single repeater, multiple repeaters can be
used to increase the covered communication distance to the required coverage expected (Fig. 6).
If two or more thermostats are too far away and cannot join the main network a single repeater may be used as long as
the cluster of devices are at recommended distances for the main network deployment (Fig. 7).
HONEYWELL THERMOSTAT(S)
62-2022—05
HONEYWELL THERMOSTAT(S)
MAIN MESH CLUSTER
ALL DISTANCES
LINE OF SIGHT MAXIMUM 100 FEET (30 M)
THROUGH PARTITIONS MAXIMUM 30 FEET (31 M)
Fig. 5. Single remote thermostat
HONEYWELL THERMOSTAT(S)
MAIN MESH CLUSTER
TB-RP5000W
REPEATER
ALL DISTANCES
LINE OF SIGHT MAXIMUM 100 FEET (30 M)
THROUGH PARTITIONS MAXIMUM 30 FEET (31 M)
Fig. 6. Single remote thermostat with multiple repeaters
MAIN MESH CLUSTER
(MORE THAN ONE CAN BE USED)
ALL DISTANCES
LINE OF SIGHT MAXIMUM 100 FEET (30 M)
THROUGH PARTITIONS MAXIMUM 30 FEET (31 M)
Fig. 7. Two or more remote thermostats
TB-RP5000W
REPEATER
TB-RP5000W REPEATER(S)
(MORE THAN TWO
CAN BE USED)
TB-RP5000W REPEATER
4
REMOTE
HONEYWELL
THERMOSTAT
M32555
REMOTE
HONEYWELL
THERMOSTAT
M32556
REMOTE HONEYWELL
THERMOSTAT(S) CLUSTER
M32557
Advertisement
