Advertisement
1.3. GENERAL SAFETY RULES.
The use of this machine is demanding, so it requests a good instruction of the
operators, moreover the machine is manufactured with high technology
components that require assistance operators with specific preparation.
So, the use and maintenance of the press, request a certain attention for the
interventions in the following zones:
- working zone
- infeed zone
- electric devices
THE FIRST TWO ZONES CAN BE REACHED ONLY BY OPERATORS WHICH HAVE BEEN
EDUCATED TO THE SYSTEM USE AND ALSO INFORMED ON THE CONSEQUENCES DUE
TO AN IMPROPER USE AND INTERVENTION ON THE SYSTEM, WHILE:
INTERVENTIONS INTO THE ELECTRIC DEVICES ARE ALLOWED ONLY TO QUALIFIED
EXPERTS.
THE FOLLOWING PREVENTIONS RULES FOR CUSTOMER'S CARE ARE COMPULSORY:
Maintain accurately free and clean the place of work;
-
wear always personal protections means (CEE 89/686 e CEE 89/656);
-
before starting to work, control that all safety devices are on and efficient;
-
during work, protections or guards have to be connected;
-
IT'S ABSOLUTELY FORBIDDEN TO CLEAN THE ELECTRIC CONTROL PANEL OR ANY
-
ELECTRICAL EQUIPMENT UNDER VOLTAGE, WITH JET OF WATER;
operators are obliged to signal to person in charge any deficiency and/or
-
potential situation of danger that could happen;
the Customer has the duty to inform immediately the supplier in case any
-
defect and/or malfunction of protection safety system are found. Same goes
for every situation of presumed danger that he discovers;
the machine can not be use in places with high electromagnetic fields that
-
can cause an storage of static charge;
the level of ambient lighting should be such to guarantee full functionality of
-
the plant with maximum safety. When performing maintenance and related
activities limited to sections and/or parts of the plant not sufficiently illuminated
it is obligatory to provide for a portable source of light, taking care to avoid
shadow zone that can interfere with above mentioned activities.
6
Advertisement
