Makita DTS141 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Unit case complete
DISASSEMBLING
(1) Separate Oil unit complete section from Unit case complete. (See Fig. 3.)
(2) Disassemble Unit case complete as drawn in Fig. 7.
Fig. 7
1. Remove Bumper with a thin
slotted screwdriver.
Bumper
Slotted screwdriver
3. Put Flat washer 6 as a jig
onto Unit case complete.
jig of Flat washer 6
(253804-1)
2. Remove Unit case cover from Unit case complete by detaching
the claw of Unit case cover from the groove of Unit case complete
with a thin slotted screwdriver.
Unit case cover
Slotted screwdriver
4. Apply 1R286 on Flat washer 6 and press them with Arbor press to remove
Ball bearing 6801LLB and Oil seal 12 from Unit case complete.
1R286
Unit case cover
Unit case complete
Ball bearing
6801LLB
Oil seal 12
Unit case complete
P 5/ 11