Makita DTS141 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Oil unit complete and Gear section (cont.)
ASSEMBLING
(3) Assemble Oil unit section to Motor section. (Refer to top right illustration in Fig. 3.)
(4) Assemble the entire of Oil unit section and Motor section, Switch section to Housing set L. (Fig. 5)
Fig. 5
Mount Motor section to
Housing set L while fitting
its notches to the projections
of Housing set L.
Assemble F/R Change lever to Switch while fitting its prong
to the projection of Switch.
(5) Assemble Switch plate complete to Housing set L as drawn in Fig. 6.
Fig. 6
Assemble Switch plate complete to Housing set L while facing
the round mark side of the plate to the housing.
Housing set L
Projection of
Unit case complete
Notch of
Stator
Switch
Projections
Prong
Projection
Face the projection of Unit case complete
to Switch side, then, mount Oil unit section
to Housing set L while fitting the depression
of Unit case complete to the projection of
Housing set L.
Depression of
Unit case complete
Projection
Unit case
complete
Switch
round mark of
Switch plate
P 4/ 11