Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Before each use or daily
Every 40 hours
Checking the Tire Pressure
Service Interval: Before each use or daily
Maintain the air pressure in the tires, as uneven tire
pressure can cause uneven raking.
Check the tires when they are cold to get the most
accurate pressure reading.
If the tire pressure is low, inflate the tire(s) to 345 kPa
(50 psi).
Greasing the Power Rake
Service Interval: Every 40 hours
Grease Type: No. 2 general purpose, lithium-base
grease
1.
Turn off the engine, set the parking brake, and
remove the key from the ignition of the traction
unit.
2.
Place the power rake on a level surface.
3.
Clean the grease fittings with a rag.
Note:
Make sure to scrape any paint off the
front of the fitting(s).
4.
Apply the necessary amount of grease to the
grease fittings
(Figure 11
Maintenance Procedure
• Check the tire pressure.
• Grease all of the lubrication points.
and
Figure
12).
10
Figure 11
Figure 12
g026024
g026173
Advertisement
Table of Contents
