Xiaomi mi Smart Humidifier 2 User Manual page 8

Resetting the Wi-Fi: Press and hold the mode button for seven seconds. When the Wi-Fi indicator blinks orange, the Wi-Fi
is reset successfully.
Note: Within 30 minutes after the Wi-Fi is reset successfully, the Wi-Fi indicator will remain blue for three minutes and then
go out if the humidi er is connected to the network successfully. If the humidi er cannot connect to the network within
30 minutes, the Wi-Fi function will be disabled.
Dry running protection: When the water tank runs out of water, the humidi er will beep three times, and the indicators
will remain red for 30 seconds and go out. Then the humidi er will enter standby mode. After adding water, press the
power button to turn the humidi er on.
Water tank removal protection: When the water tank is removed, the humidi er will beep three times, and all mode
indicators will remain red. Then the humidi er will stop working. After the water tank is reinstalled, the indicators will go out
and the humidi er will enter standby mode. Press the power button to turn the humidi er on.
Over-humidity protection: When operating at level 3, the humidi er will automatically switch to level 1 if it detects that
the ambient humidity exceeds 70% RH for 30 minutes. This function can prevent tables from being wet by a large amount
of moisture.
Note: This function is disabled by default and can be enabled in the app.
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi
Home app to control your device, and to interact with other smart home devices.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi
Home" in the app store to download and install it. Open the Mi Home/Xiaomi Home
app, tap "+" on the upper right, and then follow the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions
based on the current app version.
7