How To Use - Xiaomi mi Smart Humidifier 2 User Manual

How to Use

Connecting to power: Plug the humidi er into an electrical outlet that meets the humidi er's requirements. When the
humidi er makes a beep, it is in standby mode.
Turning on/o : Press the power button to turn on/o the humidi er. When turned on for the rst time, the humidi er is at
level 1 by default.
Switching the mode: Press the mode button to cycle through the modes of level 1, level 2, level 3, and constant humidity,
and the corresponding indicator will remain white. After the humidi er is turned o and turned back on again, the mode will
be the last used one.
Level 2 Indicator
Level 1 Indicator
Mode Indicator Descriptions
Mode in operation
Insu cient water in the water tank
Water tank removed
Constant humidity mode (recommended): This mode will maintain humidity at 60% RH by default. If the current humidity
does not reach 60% RH, the humidi er will switch to level 3. When the ambient humidity reaches 60% RH, the humidi er will
automatically switch to level 1. When this mode is in use, the constant humidity indicator will remain on.
Note: It is recommended to use the constant humidity mode to prevent tables from being wet due to inappropriate mode
settings.
UV sterilization: The humidi er has a built-in UV-C light, which is turned on simultaneously with the humidi er. After the
humidi er is turned o , the UV-C light will turn o in two minutes.
Note: The UV-C light cover needs to be installed correctly by aligning the marks on the humidi er. Otherwise, the humidi er
cannot work properly.
Enabling/Disabling Wi-Fi: Press the power button and the mode button simultaneously to enable or disable Wi-Fi.
Level 3 Indicator
Constant Humidity* Indicator
* This mode is recommended.
Mode Button
Power Button
The indicator of the corresponding mode remains white.
The four indicators remain red for 30 seconds, then go out.
The four indicators remain red and go out after the water tank is reinstalled.
6