DeWalt XR LI-ION DCD460 Quick Start Manual
Hide thumbs
Also See for XR LI-ION DCD460:
- User manual ,
- Instruction manual (45 pages) ,
- Original instructions manual (28 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt XR LI-ION DCD460
Summary of Contents for DeWalt XR LI-ION DCD460
- Page 1 DCD460...
- Page 2 Fig. A Fig. B...
- Page 3 Fig. C Fig. D Fig. E Fig. F Fig. G...
- Page 4 EnGLIsh 54V STUD AND JOIST DRILL WITH ANTI-ROTATION SYSTEM 13 mm, DCD460 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data 54V Stud and Joist Drill with Anti-Rotation DCD460...
-
Page 5: Work Area Safety
EnGLIsh Batteries Chargers/Charge Times (Minutes) Cat # Weight (kg) DCB107 DCB113 DCB115 DCB118 DCB132 DCB119 DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.25 DCB181 0.35 DCB182 0.61 DCB183/B 0.40 DCB184/B 0.62 DCB185 0.35 DCB187 0.48 General Power Tool Safety Warnings e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. -
Page 6: Using An Extension Cable
EnGLIsh 4) Power tool use and care Additional Safety Rules for Drills a ) Do not force the power tool. Use the correct power • Use auxiliary handle(s), if supplied with the tool. Loss of tool for your application. The correct power tool control can cause personal injury. -
Page 7: Important Safety Instructions For All Battery Chargers
EnGLIsh Chargers • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it WALT chargers require no adjustment and are designed to be to an authorized service centre. as easy as possible to operate. •... -
Page 8: Wall Mounting
EnGLIsh hot/cold Pack Delay • Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or When the charger detects a battery pack that is too hot or too dust. Inserting or removing the battery from the charger may cold, it automatically starts a Hot/Cold Pack Delay, suspending ignite the dust or fumes. -
Page 9: Storage Recommendations
EnGLIsh Storage Recommendations WALT batteries comply with all applicable shipping regulations as prescribed by industry and legal standards which 1. The best storage place is one that is cool and dry away include UN Recommendations on the Transport of Dangerous from direct sunlight and excess heat or cold. -
Page 10: Package Contents
EnGLIsh These battery packs may be used: DCB546 and DCB547. Worklight Refer to Technical Data for more information. Chuck key Package Contents Intended Use The DCD460 heavy-duty stud and joist drill is designed for The package contains: professional drilling at various work sites (i.e., construction sites) 1 Drill DO nOT use under wet conditions or in the presence of 1 Side handle... - Page 11 EnGLIsh Fuel Gauge Battery Packs (Fig. B) InDIcaTOR DIaGnOsIs sOLUTIOn Some D WALT battery packs include a fuel gauge which Tool is Follow all warnings and consists of three green LED lights that indicate the level of functioning instructions when operating charge remaining in the battery pack.
- Page 12 EnGLIsh Removal of Keyed Chuck (Fig. F) 3. Hold tool firmly with both hands to control the twisting action of the drill. Remove the left-handed chuck screw using a T25 torx wrench, 4. IF DRILL STALLS, it is usually because it is being overloaded rotating clockwise to loosen.
-
Page 13: Optional Accessories
EnGLIsh Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous.