Advertisement
ASSEMBLY
Removing
or
installing the saw blade
CAUTION:
Always be sure that the tool is switched off
and the battery cartridge is removed before
installing
or
removing the blade.
To remove the blade, first remove the hex
socket head bolt which secures the dust
box, then remove the dust box.
Thumb screw
-
After installing the blade, install the dust box and tighten the hex socket head bolt to
secure the dust box.
To remove the blade, press the shaft lock
so that the blade cannot revolve and use
the hex wrench to loosen the bolt clock-
wise. Then remove the bolt, outer flange
and blade.
Then remove the hex socket head bolt.
outer flange and blade.
Hex wrench
(Counterclockwise)
Outer flange
Hex socket head bolt
15
Advertisement
