The manual of 4HP14 A/T removing and installing
1.3、A/T clearence adjustment
1.3.1 Shift shaft clearence adjustment
Install shift shaft clearence adjuster 5P 95 000
287 on housing surface, ensuring no clearence
between lock cam and shift cam.
Measure the distance X from shift cam to
housing surface with measuring tool.
Determine thickness of washer by following
formula:
S (mm) = X (mm) – 0.1 (mm)
For example
Measured dimensions:
X=2.3mm
S=2.3mm-0.10mm
S=2.2mm
Therefore, need 2 washers with total thickness of 2.2 mm.
-4-
CHERY AUTOMOBILE CO., LTD
S = washer thickness
X = Measured result
0.10 is selected clearance (selected clearance is within
0.10 ~ 0.2 according to table).