HOMCOM 800-102V80 Assembly & Instruction Manual page 8

Place the meat / vegetables in separate shredder bowls for processing. Grasp the
blender handle.
The speed selector is set to "PULSE". Press the pulse button to start the device.
For better mixing, you can press and hold the pulse button slightly every few
seconds.
Note: To prevent the blender from overheating, do not run it for more than 1
minute at a time. Allow the device to cool to room temperature before using it.
Remove the blender or noodle stick / lantern stick / stainless steel blender /
cutting cup
Set the speed selector to "0" to "OFF".
Turn off the device at the power source.
Unplug the device.
Press the "back button" button to exit the noodle stick / lantern stick / double egg
fork.
Turn the stainless steel stirring rod clockwise to remove it from the blender.
Turn the stirrer counterclockwise to remove it from the lid of the cutting cup, and
then rotate the lid of counterclockwise to remove it from the container of the cutting
cup.
Recipe：The container filled with 90g honey+100g raisin.
Note: When operating the hand blender, do not release the whisks / noodles /
stainless steel stirrers or rotating stirrers / cutting cups; remove the
accessories from the bowl / measuring cup (beating only after all
accessories are completely stopped) Egg waffle / stir noodle stick / stainless
steel stir stick / cutting cup).
Note: While pressing the "back button" button to remove the accessory,
always set the speed selector to "0" (OFF).
Trouble shoting
problem: reason:
No function Check plug if it is power on
Check if speed is on 0
Assy can't pull off No press the release button
Assy not work Assy not insert fully
Blender/chopper not work Speed is on 1-5,pulse not work
method:
Power is not good connected
Use 5 speed to control
Press release button,then pull off
Ensure all assy is full insert
Speed on pulse,press pulse;
7