Related Manuals for HOMCOM 800-102V80
Summary of Contents for HOMCOM 800-102V80
- Page 1 INcsb052_US INcsb052_US_800-102V80 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY ASSEMBLY & INSTRUCTION MANUAL...
- Page 2 Please read this manual thoroughly before use and save for future reference。 Safety warning Before using this appliance, you should always follow these basic precautions, including： 1.read all the manual; 2. Before use, check that the voltage of your wall outlet is the same as the voltage on the label on the bottom of the appliance.
- Page 3 SAVET HESE INSTRUCTIONS This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
-
Page 4: Control Button
• Before using this product for the first time, please clean and dry the stainless steel stir sticks, pasta sticks, whisks, measuring cups, and cutting cup containers.； • When using this appliance for the first time, you may notice a strange smell from the motor. - Page 5 ‚ Food ƒ ‚ Fig.2 Fig.3 • Install the cutting cup in the corresponding hole of the appliance, and be sure to put the cutting knife into the container before putting the food in the cutting cup (Figure 4). Warning: The shredder is very sharp, please be careful！...
- Page 6 Speed selection and function introduction: Speed setting function description Mix large quantities and dry food at low speed, such as flour, mix/ sugar, etc. (low speed） stir After adding liquid, stir into a salad Slow speed and sauce with a beater suitable speed mix/...
- Page 7 Hand mixer (double beater/dough hooks/whisk) • Ensure they insert in right place. • Power on. • Put ingredients in a container suitable for mixing, hold the handle of the appliance, start the appliance and start stirring the food to be mixed. •...
- Page 8 Place the meat / vegetables in separate shredder bowls for processing. Grasp the blender handle. The speed selector is set to “PULSE”. Press the pulse button to start the device. For better mixing, you can press and hold the pulse button slightly every few seconds.
- Page 9 Clean and maintainance 1. Unplug the appliance before cleaning and wait for it to cool down completely. 2. Wipe the outer surface of the main unit clean with a damp cloth and then polish it with a dry cloth. 3. Wipe off excess physical particles on the power cord. 4.
Need help?
Do you have a question about the 800-102V80 and is the answer not in the manual?
Questions and answers