Mitsubishi Electric Mr.SLIM PSA-M-KA Series Operation Manual page 17

7. Energy Saving
Restriction 1/2
Operation locked No /Yes
Location Indiv. /Hotel
On/Off –/Locked
Mode –/Locked
Set temp. –/Locked
Select:
Cursor Cursor
F1 F2 F3 F4
Restriction
Operation Locked Yes
On/Off Mode Set temp.
Vane Menu Fan
Louver
Changes saved
Main menu:
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
F1 F2 F3 F4
The screen to make the settings
for the operation lock function will
appear.
Move the cursor to the desired item
with the [F1] or [F2] button out of
"Operation locked," "Location," "On/
Off," "Mode," "Set temp.," "Menu,"
"Fan," "Louver," or "Vane."
Change the settings with the [F3] or
[F4] button.
• Operation locked: No (disable)/Yes
(enable)
• Location: "Individual" or "Hotel"
• On/Off: On/Off operation
• Mode: Operation mode
setting
• Set temp.: Preset temp.
"-" /
setting
"Locked"
• Vane: Vane setting
• Menu: Menu setting
• Fan: Fan speed setting
• Louver: Louver setting
When "Hotel" is selected for the
"Location" setting, the following
operations will be locked auto-
matically: Mode, Vane, Menu, and
Louver.
Press the [SELECT] button to save
the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu
........ [MENU] button
• To return to the previous screen
........ [RETURN] button
will appear on the Main
display in the Full mode when the
operation lock function setting is
enabled.
Operation guide that corresponds
to the locked function will be sup-
pressed.
To display the main menu while the
menu setting is being locked, press
and hold the [MENU] button for ten
or more seconds. Enter the admin-
istrator's password on the password
input screen.
7.2. Energy saving
7.2.1 Automatic return to the preset temperature
After the Auto return function is enabled, when the operation mode
change or ON/OFF operation is performed from this remote controller,
the set temperature automatically returns to the required temperature
regardless of the set time.
<Button operation>
Energy saving
Restriction
Energy saving
Energy data
Main menu:
Cursor
F1 F2 F3 F4
Energy saving
Auto return Yes
Cool: 60 min, 28°C
Heat: 60 min, 20°C
Schedule No
Setting display:
Cursor
F1 F2 F3 F4
Auto return
Auto return No /Yes
Cool: After 60 min
back to 28°C
Heat: After 60 min
back to 20°C
Select:
Cursor Cursor
F1 F2 F3 F4
Select "Energy saving" from the
Energy saving menu, and press the
the [SELECT] button.
The current settings will appear.
Move the cursor to "Auto return"
with the [F1] or [F2] button, and
press the [SELECT] button.
The screen to make the settings for
the automatic return to the preset
temperature will appear.
Move the cursor to the desired item
with the [F1] or [F2] button out of
"Auto return," "Cool," or "Heat."
en
15