Advertisement
S-DRIVE AND AQUAVAR SPD
Connect White and Green wires
from Moisture Sensor to the
terminals 1 and 2 on controller.
AQUAVAR AB2 OR AQUABOOST II
4
Connect Red wire from
Moisture Sensor to the terminal
number 8 on controller.
Connect Black wire
from Moisture Sensor
to terminal marked
"Com. (Blk)" on
controller.
Connect White
wire from Moisture
Sensor to the White
wire of the pressure
transducer cable with
a wire nut
Connect
Black wire
from Moisture
Sensor to
the terminal
number 9 on
controller.
Connect Red wire from
Moisture Sensor to
terminal marked "+5V
(Red)" on controller.
Connect Green wire
from Moisture Sensor
to terminal marked
"Input (Wht)" on
controller.
Advertisement
