Maintenance And Cleaning; Trouble Shooting Guide - Magic Chef MCWC52B Operating Instructions Manual

Magic chef mcwc52b: operating instruction
Table of Contents

Advertisement

Maintenance and Cleaning

Automatic Defrosting of the
Appliance
There is no need to defrost the
ice depositing on the inner back wall is defrosted
automatically.
Ice build-up on the inner back wall during the
compressor operation will defrost automatically
(when the compressor has cycled off) . Defrost
water will drain out passing through the drain
outlet in the inner back wall into a drain pan
situated above the compressor, from where it
evaporates.
Cleaning the Appliance
Disconnect the power supply before cleaning
the appliance.
Do not use coarse or aggressive cleaning
Trouble-Shooting Guide
.
Sometimes you may come across minor problems
that in most cases do not require a service call
and can be easily eliminated. The problem may
have resulted from improper handling and / or
installation of the appliance. Please refer to the
below trouble-shooting guide to assist you in
identifying the possible cause and solution to your
problem. Should the problem still persist after
completing these checkpoints, contact the closest
authorized service agent in your area for assistance.
cooler
, because
agents as you may damage the surface.
Clean the exterior with water and detergent.
Remove the detachable accessories in the
interior of the appliance and clean with water and
liquid detergent. Plastic parts cannot be washed
in dishwashers.
Wash the interior of the appliance with lukewarm
water , adding one or two spoonfuls of vinegar.
After cleaning, connect the appliance to power
supply and reload it.
Switch Off the Appliance
When Not In Use
If you do not intend to use the appliance for long
periods of time. Set the thermostat knob to the
STOP (0) position, disconnect the power supply,
take out the contents and defrost and clean the
appliance. Leave the door slightly open.
The Appliance Fails to
Operate After Connecting to
Electrical Power Supply
Check the power cord is properly connected.
.
Check the power supply in the electrical outlet.
.
(blown fuse / circuit breaker) .
Make sure the appliance is switched on.
.
(thermostat knob in operating position)
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents