Cleaning And Maintenance; Service Centre - Probuilder 32891 Instruction Manual

Cleaning and maintenance

Clean the mitre saw by wiping its exterior
parts with a damp cloth.
Use a brush to remove any filings and dirt
from the saw bench and awkward corners.
Empty the dust bag regularly by unzipping
it and turning it inside out. Wash in warm,
soapy water and allow it to air-dry.
If the motor generates more sparks than
usual, check the carbon brushes.
Unscrew the carbon brush holders (3). If
the carbon brushes become worn so that
they are shorter than 6 mm, both should be
changed at the same time.
Keep the mitre saw out of the reach of
children in a dry, dust- and frost-free location.
Transport
Lock the saw arm securely in the low
position. Lock the telescopic extension
securely in the extended position.
Carry the mitre saw by the carrying handle
(27).
G

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
GB
63