Main Components - Probuilder 32891 Instruction Manual

• Always use saw blades with correct size
and shape (diamond versus round) of
arbour holes. Saw blades that do not
match the mounting hardware of the saw
will run off-centre, causing loss of control.
• Never remove cuttings, wood chips, etc.
from the cutting area while the power
tool is running. Always guide the tool
arm back to the neutral position first and
then switch the power tool off.
• Do not touch the saw blade after working
before it has cooled. The saw blade
becomes very hot while working.
• Your product is fitted with an BS 1363/A
approved electric plug with internal fuse
(ASTA approved to BS 1362). If the plug
is not suitable for your socket outlets,
it should be cut off and an appropriate
plug fitted in its place by an authorised
customer service agent. The replacement
plug should have the same fuse rating as
the original plug.The severed plug must
be disposed of to avoid a possible shock
hazard and should never be inserted into
a mains socket elsewhere.
• Never make warning signs on the
machine unrecognisable .

Main components

1. Lock switch
2. On/off button
3. Carbon brush holder
4. Movable blade guard
5. Adjustable guide
6. Fixed guide
7. Pull-out rail
8. Saw bench
9. Arm with saw insert
10. Lock knob for mitre angle
11. Mitre angle release knob
12. Quick stop for fixed angles
13. Foot with mounting hole
14. Length stop on support rail
15. Lock knob for support rail
16. Lock knob for bevel angle
17. Lock knob for clamp
18. Stanchion for screw clamp
19. Telescopic extension
20. Dust bag
21. Dust extractor nozzle
22. Fixed blade guard
23. Screw clamp
24. Scale for bevel angle
25. Stop plate (not shown)
26. Depth adjustment screw
27. Carrying handle
28. Spindle lock
29. Feed roller
30. Saw blade
31. Locking screw for adjustable guide
32. Locking bolt for saw arm
33. Locking screw for telescopic extension
34. Handle
35. Pointer
36. Scale
GB
57