EU directives. Oventrop GmbH & Co. KG hereby declares that the wireless installation types ClimaCon F 210 and F 310 comply with the directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.oventrop.com.
2.3.1 Danger due to electric current The ClimaCon F room thermostats are electronically Make sure that the product can be disconnected controlled operating devices for controlling surface heating and cooling systems as well as heating and from the power supply at any time.
ClimaCon F Technical description 3. Technical description Installation scheme (example) Fig. 1: Installation scheme (example) Design 3.2.1 ClimaCon F 90, F 100 Control unit Mounting plate Terminal strip Opening for the cable feed Release clip Fig. 2: Design F 90, F 100 115500984-V07.11.2022...
The setback output can be connected to the setback input (follower) of a ClimaCon F 90, F 100 room thermostat. The voltage at the setback input reduces the temperature at the follower room thermostat by 4 Kelvin compared to the temperature set at the scale (position in Fig.
ClimaCon F Technical description ClimaCon F 100 Switching on/off / PWM 3.3.2.4 ClimaCon F 310 - Heating or cooling • Dot-Matrix display for visualisation of the setpoint temperature, the actual temperature, various error codes, the display “BLu” for the teach-in mode, as well as the OFF display when the device is switched off •...
ClimaCon F Technical description Technical data 3.5.2.2 ClimaCon F 100 (230 V) Parameter Value 3.5.1 General Temperature adjustment 12 °C to 28 °C, frost pro- Parameter Value range tection Mode of operation Type 1.Y Protection category IP20 Contamination degree Switching current (short- 1 A time)
Page 11
Protection class Dimensions (WxHxD) mm 88x88x25 Accuracy at +25 °C +/- 1 K Required actuator Electrothermal actuator 3.5.3 F 210, F 310 “normally closed” 3.5.3.1 ClimaCon F 210 Fuse SMD (not exchangeable) Colour White Parameter Value Operating voltage 230 V AC / 50-60 Hz Temperature adjustment 12 °C to 28 °C, frost pro-...
You will find the current accessories and spare part list on NOTICE our website. Damage to the ClimaCon due to unsuitable power Call up the search on the website www.oventrop.com by clicking on the magnifying supply (24 V version) glass symbol and search for 1155.
Mounting Mounting of the mounting plate Drill at least two holes (opposite each other) and insert dowels. The ClimaCon F room thermostat is designed for Screw on the mounting plate. surface-mounted installation. Only use device screws for switch boxes Operate the room thermostat at a location in the (countersunk screws).
Page 14
ClimaCon F Mounting 6.4.1.2 ClimaCon F 100 (230 V) (item no. 1155010) 6.4.1.4 ClimaCon F 210 (230 V) (item no. 1155021) Terminal Assignment Terminal Assignment IN (L 230 V) operating voltage IN (L 230 V) operating voltage IN (N 230 V) operating voltage IN (N 230 V) operating voltage OUT (L 230 V) on/off / PWM...
App installation (F 210, F 310) SELV The ClimaCon F app is available for both Android and iOS. 6.4.2 Connection of the room thermostat Note the minimum requirements regarding the NOTICE version of the operating system and the Bluetooth version (see par.
Danger due to electric current! The setback input (ClimaCon F 90, F 100; terminal Start the ClimaCon F app on your smartphone. 4) and the change-over input (ClimaCon F 100, F 310; terminal 5) are not potential-free.
210, F 310 - Removal of a room thermostat Fig. 15: ClimaCon F app - Removal of a room thermostat Tap and hold the room thermostat that you want to remove. A selection menu opens in which you can remove the room thermostat.
Page 18
Here you can also delete the respective time profile (Fig. 18 on page 19). Fig. 16: ClimaCon F app - Weekly profile Selection of the weekly profile Set the desired “Eco setback temperature” by moving the blue dot to the desired value with your finger or a pen.
18 °C and 25 °C in the app and on the room thermostat. 7.2.4.2 Operating mode Fig. 20: ClimaCon F app - Call-up of the extended The currently set operating mode "Heating" or "Cooling" is settings displayed here. Call-up of the extended settings The corresponding setting can be changed in the “Extended settings”...
For surface heating systems, we generally recommend pulse-width modulation (PWM). This Fig. 21: ClimaCon F App - Entering the installer code enables a fast and accurate reaction to temperature differences between the measured To call up the extended settings, enter the installer code actual values and the defined setpoint values.
8. Operation page 9) for more than three seconds The device switches off (OFF mode). Bluetooth and control functions are switched off. ClimaCon F 90, F 100 The frost protection function remains active. Select the desired setpoint temperature with the rotary wheel (position in Fig.
ClimaCon F Troubleshooting 9. Troubleshooting MALFUNCTION CAUSE REMEDY The app does not find the room Other devices equipped with Blue- During the teach-in process, temporarily thermostat during teach-in. tooth interfere with the connection switch off all Bluetooth-equipped devices between the room thermostat and that are not needed.