Table of contents Product overview Product overview This kit consists of main components required to install an Easee Equalizer on a charging site with Technical specifications one or multiple circuits. All of the components Before you start are tested and guaranteed to work with the Easee Equalizer (E02-EQP).
— CT Clamps and Rogowski Coils must be fitted in the correct orientation to read incoming Length: 1.5m Connector plug: RJ12 power line. Lead cable: 6 pin — 6A Single Pole Fuse — Install the Easee Installer App on your phone by using the QR code below.
Equalizer Kit Installing WARNING! Turn off the power before you begin Wiring the installation. Use extreme caution and follow instructions carefully. Connection — Install the components in the distribution box CT clamps according to the wiring diagram below:...
Page 5
Equalizer Setting up Download the Easee Installer App via App store or Google play. To use the Easee Installer App, you must have an Easee Cloud account. If you already have an account, you can log in immediately. If you have created a site already, then please skip directly to step 2.
— If the Wi-Fi is not already available, connect is already installed you will need to be invited the Charging Robot via the Easee Cloud, the as an administrator to access it in the Easee Easee app or via the Charging Robot’s Wi-Fi Installer App.
Page 7
Red – Not connected Use the Easee App to set up the WiFi. Contact your utility company to activate the HAN port. Go to http://easee.support. Check your internet connection. After booting, it can take a few minutes before Easee Link status flashes green.
Page 8
Easee Home and Equalizer to receive retrieving data, or computer networks without the written more rapid assistance. permission of Easee AS. Easee and all other Easee product names and slogans are Easee Customer Excellence trademarks or registered trademarks of Easee AS. Easee Telephone: 02039946725 products can be protected by one or more patents.
Need help?
Do you have a question about the E02-EQP and is the answer not in the manual?
Questions and answers