Creating A Route To A Nearest Poi; Creating A Route To A Poi From An Upcoming Freeway Exit - Magellan RoadMate 2000 Reference Manual

Creating a route to a nearest POI

1. From the Main Menu, tap POI.
2. Select the category for the POI you are searching for. (Note that some categories
have an additional subcategory that is displayed after the main category had been
selected.
3. Tap Near.
4. Select Current Position, Address or City Center.
The most common will be Current Position. In this case you could be looking for
the gas station nearest to your current position.
5. A list of POIs for the category selected
will be presented. Tap on the POI you
wish to go to.
6. Once the POI has been selected from the
available list, select the routing method
you want to use and the Magellan
RoadMate will begin calculating the
route.

Creating a route to a POI from an upcoming freeway exit

This feature is available only while travelling on a freeway. The instructions here apply to
creating a route to an upcoming freeway exit when you are not currently on a route. (If
you are on a route, use the MENU button and select Exit POI.)
1. From the Main Menu, tap POI.
2. Tap POI Around the Exit.
3. Select the exit you would like the POI displayed for to see all four of the categories
for that exit or select the icon of the category just to see those POIs for that
category for that exit
4. Select a POI from the list of available POIs.
5. Once the POI has been selected, select the routing method you want to use and
the Magellan RoadMate will begin calculating the route.
Creating Routes
This is a sample list of POIs that meet the
criteria set. The address and phone number is
displayed to help you select the right POI. The
red arrow indicates the approximate direction of
the POI from your current position.
11